Safe Operation Of Hydraulic Pipe Bender

1. Before operation, first check whether the lubricating points are short of oil, whether the motion mechanism is loose, and whether the safety protection device is reliable. It can be operated after confirmation. 2, starting the oil pump, whether the system pressure is kept within the prescribed range, if high, damage hydraulic components, waste power supply, if too low, affect the work. RPk technology - (jishutong.com technical work class information network) UGAutoCADlproelCAXA car hit a power drill | CNC machine

3, adjust the required position and Angle of the parts

4. Adjust the positioning of the parts to the required length.

5, adjust the vertical lifting guide rail, so that the guide mold pressing cylinder forward can clamp tightly iron pipe

6. The clamping mould pressing cylinder can clamp the iron pipe. 7, the normal operation of the workpiece into the bending die, and the front end contact positioning, step down the foot switch, can be completed. 8, when bending, mind should be concentrated, do not put hands or other items into the work area, in case of emergency, press the emergency stop button, and then turn the torsion switch to the manual position, manual reset, in case of failure, timely repair.

9. After the work, cut off the power supply and do a good job of cleaning and lubrication.